Nederland
België
Deutschland
United Kingdom
Finland
Ireland
Luxembourg
Portugal
Poland
Österreich
France
España
Italia
Sverige
Danmark
Elitewheels Pro36 MTB hjul
Elitewheels Pro36 MTB hjul
1/7
5 761
Vælg en type for at se vores lager
- Levering 2-3 arbejdsdage
- Gratis levering med Track & Trace
- Trustpilot bedømmelse 4.7/5
- Nem returnering
Stil et spørgsmål om dette produkt
E-mail vores kundeserviceFordele og ulemper
Fordele og ulemper
- The Elitewheels Pro36 mtb wheels are designed for cross country and all mountain use.
- The rims are internally 30mm and externally 36mm wide while maintaining an impressively low weight of 1510 grams!
- Tension in the wheel is nicely distributed thanks to 28 Sapim CX ray spokes with 3-cross spoking pattern.
- These wheels do not require retensioning, as this is already included in the production process.
- Elitewheels Pro hubs with good sealing and TPI industrial bearings run smoothly even in the long run.
- 6-hole brake disc connection is less common but a lighter system than centrelock.
- Not suitable for e-mtb.
Specifikationer
Specifikationer
|
Mærke
|
Elitewheels |
| 29'' | |
| Hjulsæt | |
| Cross Country / All mountain | |
| 2,35 inch - 2,50 inch | |
| 110 x 15 mm aksel (Boost) | |
| 148 x 12 mm aksel (Boost) | |
|
Fælg materiale
|
Carbon |
|
Fælgbredde (indre)
|
30 mm |
Beskrivelse
Beskrivelse
The Elitewheels Pro36 carbon mtb wheels are designed for cross-country and all-mountain use. The Elitewheels Pro36 mtb wheels have a hookless rim which ensures that the tyre fits the rim better. With an internal rim width of 30 mm, you get more stability and comfort which benefits when taking on obstacles and technical descents. These Elitewheels Pro36 have everything you need to attack the most challenging all-mountain courses.
The high-precision Elitewheels Pro hubs with good sealing and TPI industrial bearings spin smoothly and hold up well over a longer duration. Tension in the wheel is nicely distributed thanks to the 28 strong and reliable Sapim CX ray spokes with a 3-cross spoking pattern. Despite the rim width and number of spokes, it remains a very light mountain bike wheelset.
Rims
Toray T700- as T800 carbon fibres are used for the rims. These two types of carbon fibres are used in different places to increase the wheel's strength-to-weight ratio, while reducing lateral and radial forces and increasing power transmission. The rims are also specially designed to make sealing tubeless tyres with a floor pump even easier.
Hubs
The Elitewheels Pro hub comes standard and features TPI bearings. Both the front and rear hubs are made of 7075 aluminium alloy. The lightweight body features a ratchet system with 36 teeth.
Spokes
Sapim CX-Ray spokes are used in the Pro36 wheels. After the initial alignment, the wheel is loaded sideways. This process is repeated again. The wheels are side-loaded a total of 16 times. We consider this an essential quality control standard. As a result, our wheels are guaranteed to stay within 0.2 mm of the actual value. The spoke shift of 2.8 mm minimises the difference in spoke tension right and left. This makes for a stronger and laterally stiffer wheel, giving you more control.
• 2x Tubeless rim tape (pre-mounted)
• 2x Tubeless valves (pre-mounted)
Vis mere
Vis mindre
The high-precision Elitewheels Pro hubs with good sealing and TPI industrial bearings spin smoothly and hold up well over a longer duration. Tension in the wheel is nicely distributed thanks to the 28 strong and reliable Sapim CX ray spokes with a 3-cross spoking pattern. Despite the rim width and number of spokes, it remains a very light mountain bike wheelset.
Rims
Toray T700- as T800 carbon fibres are used for the rims. These two types of carbon fibres are used in different places to increase the wheel's strength-to-weight ratio, while reducing lateral and radial forces and increasing power transmission. The rims are also specially designed to make sealing tubeless tyres with a floor pump even easier.
Hubs
The Elitewheels Pro hub comes standard and features TPI bearings. Both the front and rear hubs are made of 7075 aluminium alloy. The lightweight body features a ratchet system with 36 teeth.
Spokes
Sapim CX-Ray spokes are used in the Pro36 wheels. After the initial alignment, the wheel is loaded sideways. This process is repeated again. The wheels are side-loaded a total of 16 times. We consider this an essential quality control standard. As a result, our wheels are guaranteed to stay within 0.2 mm of the actual value. The spoke shift of 2.8 mm minimises the difference in spoke tension right and left. This makes for a stronger and laterally stiffer wheel, giving you more control.
Produktet indeholder
• Elitewheels Pro36 MTB wheels• 2x Tubeless rim tape (pre-mounted)
• 2x Tubeless valves (pre-mounted)
Anbefalet af produktspecialisten
Anbefalet af produktspecialisten
Relaterede produkter
Relaterede produkter
|
|
|
|
|
| Elitewheels Pro36 | DT Swiss XR1700 Spline 25 | Bontrager Line Elite 30 TLR Boost | Bontrager Line Carbon 30 TLR | |
| 0 Anmeldelser | 3 Anmeldelser | 4 Anmeldelser | 0 Anmeldelser | |
| Hjulstørrelse | 29'' | 29'' | 27,5'' | 29'' |
| Type af hjul | Hjulsæt | Hjulsæt / Forhjul | Hjulsæt / Forhjul | Hjulsæt |
| Anvendelse | Cross Country / All mountain | Cross Country | Enduro | Enduro |
| Dækbredde anbefalet af Mantel | 2,35 inch - 2,50 inch | 2,10 inch - 2,35 inch | ||
| Fornav indbygningsbredde | 110 x 15 mm aksel (Boost) | 110 x 15 mm aksel (Boost) | 110 x 15 mm aksel (Boost) | 110 x 15 mm aksel (Boost) |
| Friløbsnav indbygningsbredde | 148 x 12 mm aksel (Boost) | 148 x 12 mm aksel (Boost) | 148 x 12 mm aksel (Boost) | 148 x 12 mm aksel (Boost) |
| 5 761 | Fra 2 097 | Fra 1 941 | Fra 2 338 | |
| Dette produkt | Se produkt | Se produkt | Se produkt |
Alle specifikationer
General
Komponenter
Fælg materiale
Carbon
Materiale eger
Rustfrit stål
Materiale nipler
Aluminium
Antal eger i forhjul
28
Antal eger i baghjul
28
Dimensioner
Inkluderet
Adapter medfølger (se venligst specifikationerne)
Nej
Quick release medfølger
Nej
Hjultaske medfølger
Nej
Elitewheels Pro36 MTB hjul
Alle specifikationer
Mærke
Elitewheels
General
Komponenter
Fælg materiale
Carbon
Materiale eger
Rustfrit stål
Materiale nipler
Aluminium
Antal eger i forhjul
28
Antal eger i baghjul
28
Dimensioner
Inkluderet
Adapter medfølger (se venligst specifikationerne)
Nej
Quick release medfølger
Nej
Hjultaske medfølger
Nej
Elitewheels Pro36 MTB hjul
Beskrivelse
The Elitewheels Pro36 carbon mtb wheels are designed for cross-country and all-mountain use. The Elitewheels Pro36 mtb wheels have a hookless rim which ensures that the tyre fits the rim better. With an internal rim width of 30 mm, you get more stability and comfort which benefits when taking on obstacles and technical descents. These Elitewheels Pro36 have everything you need to attack the most challenging all-mountain courses.The high-precision Elitewheels Pro hubs with good sealing and TPI industrial bearings spin smoothly and hold up well over a longer duration. Tension in the wheel is nicely distributed thanks to the 28 strong and reliable Sapim CX ray spokes with a 3-cross spoking pattern. Despite the rim width and number of spokes, it remains a very light mountain bike wheelset.
Rims
Toray T700- as T800 carbon fibres are used for the rims. These two types of carbon fibres are used in different places to increase the wheel's strength-to-weight ratio, while reducing lateral and radial forces and increasing power transmission. The rims are also specially designed to make sealing tubeless tyres with a floor pump even easier.
Hubs
The Elitewheels Pro hub comes standard and features TPI bearings. Both the front and rear hubs are made of 7075 aluminium alloy. The lightweight body features a ratchet system with 36 teeth.
Spokes
Sapim CX-Ray spokes are used in the Pro36 wheels. After the initial alignment, the wheel is loaded sideways. This process is repeated again. The wheels are side-loaded a total of 16 times. We consider this an essential quality control standard. As a result, our wheels are guaranteed to stay within 0.2 mm of the actual value. The spoke shift of 2.8 mm minimises the difference in spoke tension right and left. This makes for a stronger and laterally stiffer wheel, giving you more control.
Produktet indeholder
• Elitewheels Pro36 MTB wheels• 2x Tubeless rim tape (pre-mounted)
• 2x Tubeless valves (pre-mounted)